View LXH8-FW27-Y_5847003.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

luxeon t ds106 ?2012 philips lumileds lighting company. luxeon t high-effcacy, illumination grade led light source introduction luxeon ? t emitters are illumination grade leds designed to deliver high effcacy with high fux density to enable tight beam control in directional and high lumen applications. with freedom from binning tm and leading performance, luxeon t emitters allow system optimization by blending the perfect combination of high effcacy and low system cost. with tight correlated color temperature control, luxeon t ensures consistency in system color point. luxeon t ? superior effcacy and light output from a compact source ? optimized for effcacy driven applications with typical v f of 2.7v and lowest thermal resistance, 3k/w ? delivers high luminance ideal for directional lighting ? specifed, targeted and tested hot, at real world operating temperatures, t j = 85c to ensure in application performance ? freedom from binning delivers color consistency within a single 3 or 5-step macadam ellipse ? proven reliability ? exceeds energy star lumen maintenance requirements ? ul-recognized component [e352519] with level 4 enclosure consideration key applications ? lamps ? downlights ? indoor ? highbay and lowbay ? outdoor ? architectural http://www..net/ datasheet pdf - http://www..net/
ds106 luxeon t 20121203 ?2012 philips lumileds lighting company. i table of contents general information 2 product nomenclature 2 lumen maintenance 2 environmental compliance 2 product selection guide 3 optical characteristics 3 electrical characteristics 4 jedec moisture sensitivity 4 refow soldering characteristics 5 mechanical dimensions 6 solder pad design 7 relative spectral distribution vs wavelength characteristics 8 light output characteristics 9 typical forward current characteristics 10 emitter pocket tape packaging 11 emitter reel packaging 12 product binning and labeling 13 luxeon t 3-step and 5-step macadam ellipse color defnition 14 company information 15 http://www..net/ datasheet pdf - http://www..net/
ds106 luxeon t 20121203 ?2012 philips lumileds lighting company. 2 general information product nomenclature luxeon t emitters are specifed and binned hot under conditions comparable to those found in real-world lighting products. the test conditions for luxeon t are 700 ma dc with junction temperature at 85c. the part number designation is explained as follows: l x h c C f w xx C y where: c C designates minimum cri performance (7 for 70 cri, 8 for 80 cri, 9 for 90 cri) xx C designates nominal ansi cct (27 for 2700k, 30 for 3000k y C 3 designates 3 sdcm and 5 designates 5 sdcm therefore 80 cri products tested and binned at 2700k will have the part numbering scheme: l x h 8 C f w 2 7 lumen maintenance luxeon t products are tested in compliance with lm-80. please visit www philipslumileds com/support/documentation/ lumen-maintenance or contact your local philips lumileds technical solutions manager for tm-21 extrapolations or other support. environmental compliance philips lumileds is committed to providing environmentally friendly products to the solid-state lighting market. luxeon t is compliant to the european union directives on the restriction of hazardous substances in electronic equipment, namely the rohs and reach directives. philips lumileds will not intentionally add the following restricted material to the luxeon t: lead, mercury, cadmium, hexavalent chromium, polybrominated biphenyls (pbb) or polybrominated diphenyl ethers (pbde). http://www..net/ datasheet pdf - http://www..net/
ds106 luxeon t 20121203 ?2012 philips lumileds lighting company. 3 product selection guide product selection guide for luxeon t emitters junction temperature = 85c table 1. typical performance characteristics at 350 ma, 700 ma, and 1000 ma for luxeon t, junction temperature = 85c part number nominal ansi cct cri luminous flux (lm) min typical luminous flux (lm) typical forward voltage (v f ) typical effcacy (lm/w) 700 ma 700 ma 350 ma 700 ma 1000 ma 350 ma 700 ma 1000 ma 350 ma 700 ma 1000 ma LXH8-FW27-Y 2700k 80 min 170 100 186 254 2.71 2.80 2.86 105 95 89 lxh8-fw30-y 3000k 80 min 180 106 197 269 2.71 2.80 2.86 112 101 94 lxh8-fw35-y 3500k 80 min 190 112 208 278 2.71 2.80 2.86 118 106 97 lxh8-fw40-y 4000k 80 min 190 114 212 288 2.71 2.80 2.86 120 108 101 lxh8-fw50-y 5000k 80 min 190 120 222 300 2.71 2.80 2.86 127 113 105 lxh9-fw30-y 3000k 95 typ 130 86 160 216 2.71 2.80 2.86 91 82 76 notes for table 1: 1. philips lumileds maintains a tolerance of 6.5% on luminous fux and 2 on cri measurements. optical characteristics luxeon t at test current 1 , junction temperature = 85c table 2. nominal ansi cct part number color temperature cct typical typical total included angle 2 (degrees) u 0 90v typical viewing angle 3 (degrees) 2u 1/2 2700k LXH8-FW27-Y 2725k 160 120 3000k lxh8-fw30-y 3045k 160 120 3500k lxh8-fw35-y 3465k 160 120 4000k lxh8-fw40-y 3985k 160 120 5000k lxh8-fw50-y 5028k 160 120 notes for table 2: 1. test current is 700 ma d.c. for all lxhc-fwxx emitters. 2. total angle at which 90% of total luminous fux is captured. 3. viewing angle is the off axis angle from lamp centerline where the luminous intensity is ? of the peak value. http://www..net/ datasheet pdf - http://www..net/
ds106 luxeon t 20121203 ?2012 philips lumileds lighting company. 4 electrical characteristics electrical characteristics at 700 ma for luxeon t junction temperature = 85oc table 3. nominal ansi cct forward voltage v, 1 (v) typical temperature coeffcient of forward voltage 2 (mv/c) dv f / dt j typical thermal resistance junction to thermal pad (c/w) ru j-c min max 2700k 2.55 3.00 -1.6 3 3000k 2.5 3.00 -1.6 3 3500k 2.5 3.00 -1.6 3 4000k 2.5 3.00 -1.6 3 5000k 2.5 3.00 -1.6 3 notes for table 3: 1. philips lumileds maintains a tolerance of 0.06v on forward voltage measurements. 2. measured between t j = 25c and t j = 110c at i f = 700 ma. absolute maximum ratings table 4. parameter luxeon t dc forward current (ma) 1, 2 1050 peak pulsed forward current (ma) 1, 3 1200 esd sensitivity < 8000v human body model (hbm) class 3a jesd22-a114-e led junction temperature 1 150c operating case temperature at 700 ma -40c - 135c storage temperature -40c - 135c soldering temperature jedec 020c 260c allowable refow cycles 3 reverse voltage (vr) luxeon t leds are not designed to be driven in reverse bias notes for table 4: 1. proper current derating must be observed to maintain junction temperature below the maximum. for additional information on thermal measurement guidelines please refer to application brief ab106. 2. residual periodic variations due to power conversion from alternating current (ac) to direct current (dc), also called ripple, with frequencies 3. 100 hz and amplitude 200 ma are acceptable, assuming the average current throughout each cycle does not exceed 1000 ma. 4. pulsed operation with a peak drive current of 1200 ma is acceptable if the pulse on-time is 5 ms per cycle and the duty cycle is 50% jedec moisture sensitivity table 5. level floor life soak requirements standard time conditions time conditions 1 unlimited [ 30c / 168h 85c / 85% 85% rh + 5 / - 0 rh http://www..net/ datasheet pdf - http://www..net/
ds106 luxeon t 20121203 ?2012 philips lumileds lighting company. 5 refow soldering characteristics figure 1. temperature profle for table 6. table 6. profle feature lead free assembly average ramp-up rate (ts max to t p ) 3c / second max preheat temperature min (ts min ) 150c preheat temperature max (ts max ) 200c preheat time (ts min to ts max ) 60 - 180 seconds time maintained above temperature t l 217c time maintained above time (t l ) 60 - 150 seconds peak / classifcation temperature (t p ) 260c time within 5c of actual peak temperature (t p ) 20 - 40 seconds ramp-down rate 6c / second max time 25c to p eak temperature 8 min utes max jedec 020c http://www..net/ datasheet pdf - http://www..net/
ds106 luxeon t 20121203 ?2012 philips lumileds lighting company. 6 mechanical dimensions figure 2. notes for figure 2: ? do not handle the device by the lens. excessive force on the lens may damage the lens itself or the interior of the device. ? drawings not to scale. ? all dimensions are in millimeters. ? the thermal pad is electrically isolated from the anode and cathode contact pads. http://www..net/ datasheet pdf - http://www..net/
ds106 luxeon t 20121203 ?2012 philips lumileds lighting company. 7 solder pad design figure 3. solder pad layout. note for figure 3: ? the photograph shows the recommended luxeon t layout on printed circuit board (pcb). ? for more information on assembly and layout, please refer to application brief 110 (ab110). ? the .dwg fles are available at www philipslumileds com and www philipslumileds cn com . http://www..net/ datasheet pdf - http://www..net/
ds106 luxeon t 20121203 ?2012 philips lumileds lighting company. 8 relative spectral distribution vs wavelength characteristics color spectrum for lxh8-fwxx products, junction temperature = 85c figure 4. color spectrum of lxhc-fwxx. http://www..net/ datasheet pdf - http://www..net/
ds106 luxeon t 20121203 ?2012 philips lumileds lighting company. 9 light output characteristics relative light output vs junction temperature for lxh8-fwxx products test current = 700 ma figure 5. relative light output vs. junction temperature, lxhc-fwxx. relative light output vs forward current junction temperature = 85c figure 6. typical relative luminous fux vs. forward current, lxhc-fwxx. http://www..net/ datasheet pdf - http://www..net/
ds106 luxeon t 20121203 ?2012 philips lumileds lighting company. 10 typical forward current characteristics junction temperature = 85c figure 7. typical forward current vs. forward voltage, lxhc-fwxx. typical radiation pattern typical representative spatial radiation pattern for lxh8-fwxx products figure 8. typical representative spatial radiation pattern for lxhc-fwxx. http://www..net/ datasheet pdf - http://www..net/
ds106 luxeon t 20121203 ?2012 philips lumileds lighting company. 11 emitter pocket tape packaging figure 9. emitter pocket tape packaging. http://www..net/ datasheet pdf - http://www..net/
ds106 luxeon t 20121203 ?2012 philips lumileds lighting company. 12 emitter reel packaging figure 10. emitter reel packaging. http://www..net/ datasheet pdf - http://www..net/
ds106 luxeon t 20121203 ?2012 philips lumileds lighting company. 13 product binning and labeling purpose of product binning in the manufacturing of semiconductor products, there are variations in performance around the average values given in the technical data sheets. for this reason, philips lumileds bins the led components for luminous fux and forward voltage (v f ). color is offered in a single 3-step or 5-step macadam ellipse color space centered on the ansi cct color bins. for additional information please review the macadam ellipse technical defnition section. decoding product bin labeling luxeon t emitters are labeled using a four digit alphanumeric code (cat code) depicting the bin values for emitters packaged on a single reel. all emitters packaged within a reel are of the same 3-variable bin combination. reels of luxeon t emitters are labeled with a four digit alphanumeric cat code following the format below abcd a = flux bin (l, m, etc.) bc = color bin (73, 7a, 7b etc.) d = v f bin (p, r) luminous flux and forward voltage bins table 7 lists the standard photometric luminous fux bins for luxeon t emitters (tested and binned at 700 ma and t j = 85c). although several bins are outlined, product availability in a particular bin varies by production run and by product performance. not all bins are available in all colors. table 7. flux bins C all colors bin code minimum photometric flux (lm) maximum photometric flux (lm) g 160 170 h 170 180 j 180 190 k 190 200 l 200 210 m 210 220 n 220 230 p 230 240 q 240 250 r 250 260 table 8 lists minimum and maximum v f bin values per emitter. although several bins are outlined, product availability in a particular bin varies by production run and by product performance. table 8. v f bins bin code minimum forward voltage (v) maximum forward voltage (v) p 2.50 2.75 r 2.75 3.00 s 3.00 3.25 http://www..net/ datasheet pdf - http://www..net/
ds106 luxeon t 20121203 ?2012 philips lumileds lighting company. 14 luxeon t 3-step and 5-step macadam ellipse color defnition tested at 700 ma dc & junction temperature = 85c table 9. luxeon t product characteristics for 3-step macadam ellipse part number nominal ansi cct color space center point (cx, cy) major axis, a minor axis, b ellipse rotation angle lxh8-fw27-3 2700k single 3-step macadam ellipse (0.4578, 0.4101) 0.00810 0.00420 53.7 lxh8-fw30-3 3000k single 3-step macadam ellipse (0.4338, 0.4030) 0.00834 0.00408 53.2 lxh8-fw35-3 3500k single 3-step macadam ellipse (0.4073, 0.3917) 0.00927 0.00414 54.0 lxh8-fw40-3 4000k single 3-step macadam ellipse (0.3818, 0.3797) 0.00939 0.00402 53.7 lxh8-fw50-3 5000k single 3-step macadam ellipse (0.3447, 0.3553) 0.00822 0.00354 59.6 table 10. luxeon t product characteristics for 5-step macadam ellipse part number nominal ansi cct color space center point (cx, cy) major axis, a minor axis, b ellipse rotation angle lxh8-fw27-5 2700k single 5-step macadam ellipse (0.4578, 0.4101) 0.01350 0.00700 53.7 lxh8-fw30-5 3000k single 5-step macadam ellipse (0.4338, 0.4030) 0.01390 0.00680 53.2 lxh8-fw35-5 3500k single 5-step macadam ellipse (0.4073, 0.3917) 0.01545 0.00690 54.0 lxh8-fw40-5 4000k single 5-step macadam ellipse (0.3818, 0.3797) 0.01565 0.00670 53.7 lxh8-fw50-5 5000k single 5-step macadam ellipse (0.3447, 0.3553) 0.01370 0.00590 59.6 note for tables 9 & 10: ? philips lumileds maintains a tester tolerance of 0.005 on x, y color coordinates. rohs compliant http://www..net/ datasheet pdf - http://www..net/
ds106 20121203 ?2012 philips lumileds lighting company. all rights reserved. luxeon is a registered trademark of the philips lumileds lighting company in the united states and other countries. www philipslumileds com www philipslumileds cn com www futurelightingsolutions com for technical assistance or the location of your nearest sales offce contact any of the following: north america 1 888 589 3662 americas@futurelightingsolutions com europe 00 800 443 88 873 europe@futurelightingsolutions com asia pacifc 800 5864 5337 asia@futurelightingsolutions com japan 800 5864 5337 japan@futurelightingsolutions com philips lumileds lighting company shall not be liable for any kind of loss of data or any other damages, direct, indirect or consequential, resulting from the use of the provided information and data. although philips lumileds lighting company has attempted to provide the most accurate information and data, the materials and services information and data are provided as is and philips lumileds lighting company neither warranties, nor guarantees the contents and correctness of the provided information and data. philips lumileds lighting company reserves the right to make changes without notice. you as user agree to this disclaimer and user agreement with the download or use of the provided materials, information and data. company information philips lumileds is a leading provider of leds for everyday lighting applications. the companys records for light output, effcacy and thermal management are direct results of the ongoing commitment to advancing solid-state lighting technology and enabling lighting solutions that are more environmentally friendly, help reduce co 2 emissions and reduce the need for power plant expansion. philips lumileds luxeon ? leds are enabling never before possible applications in outdoor lighting, shop lighting, home lighting, digital imaging, display and automotive lighting. philips lumileds is a fully integrated supplier, producing core led material in all three base colors, (red, green, blue) and white. philips lumileds has r&d centers in san jose, california and in the netherlands, and production capabilities in san jose, singapore and penang, malaysia. founded in 1999, philips lumileds is the high fux led technology leader and is dedicated to bridging the gap between solid-state technology and the lighting world. more information about the companys luxeon led products and solid-state lighting technologies can be found at www philipslumileds com . http://www..net/ datasheet pdf - http://www..net/

▲Up To Search▲

Price & Availability of LXH8-FW27-Y

	To Download LXH8-FW27-Y Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .